Direct Factory Wholesale & OEM/ODM
Plan a modern video intercom upgrade for existing apartments and residential communities using proprietary 2 wire intercom bus technology. Re-use installed cabling, eliminate wall cutting, and cut installation labor by up to 70%.
Zero-Rewiring Smart Upgrade: Transmits 2K Video, Audio, and DC Power over Existing 2-Core Cables


Next-Gen Biometric Entry Station Powered Completely via 2-Wire Non-Polarized Bus

Retrofit Station with Integrated Numeric PIN Keypad for Keyless Visitor Access

Single Call Button 2-Wire Station for Private Villas and Retrofit Renovations (Available in Silver, Black & Grey)

2-Wire Upgraded Entry Station (KA-FV2206-1 / -2 / -3 / -4) for 1 to 4 Households Sharing Legacy Cabling

Zero-Rewiring 2B, 3B & 4B Mechanical Call Button 2-Wire Entry Panel with Wide Backlit Nameplate & 148° 2K Camera

Zero-Rewiring 2-Wire Villa & Duplex Intercom with 2K 148° Camera, 3D Face ID, Palm Vein & PIN Keypad

All-in-One 2-Wire Retrofit Entry Station: Semiconductor Fingerprint, Touch PIN Keypad, Face ID & Palm Vein

Retrofit 4/6/8/16-Family Residential Buildings over Old 2-Wire Cabling Infrastructure

7-Inch Touch Monitor Powered and Connected Completely via 2 Non-Polar Wires

Contemporary 2.5D Glass Screen Bringing Modern Aesthetics to Renovated Homes

Large-Format 10-Inch Touch Command Display Running over 2-Wire Bus Architecture

Industrial 72W 24V DC DIN-Rail Power Unit with Multi-Layer Electrical Protection

Upgrade legacy multi-core or analog intercom systems to 2K IP digital performance without pulling new Cat6 cabling. 1Karat 2-wire bus technology delivers high-definition video, two-way audio, power, and IP data over two non-polarized copper conductors up to 200 meters.
Complete upgrade package with the KA-FV2203 outdoor station (2K camera, 3D Face ID, Palm Vein) and KA2703 7-inch 2.5D curved glass indoor monitor operating over any existing 2-wire pair.
Listed MOQ: 50 Kits. Factory direct B2B pricing.
European apartment entrance station with 4, 6, 8, or 16 call buttons. Connects to existing building riser cabling, preserving interior walls and cutting rewiring costs by up to 80%.
Listed MOQ: 30 Units. Factory direct B2B pricing.
DIN-rail mounted 24V DC 3A master power supply and communication controller. Powers up to 16 indoor monitors and outdoor stations reliably over non-polarized two-wire lines.
Listed MOQ: 50 Units. Factory direct B2B pricing.
Yes. 1Karat 2-wire IP systems are engineered specifically to replace legacy 4-wire, 5-wire, and 2-wire analog intercoms without rewiring walls. Any two existing conductors with sound insulation (such as 0.5mm²–1.0mm² copper or twisted pairs) can carry 24V DC power, high-speed IP data, and full 2K video streams simultaneously when coupled with our KA2201-P centralized bus power unit.
Installation is plug-and-play due to non-polarized bus design—conductors can connect to either terminal without polarity error. Mount the outdoor station (e.g. KA-FV2203) at 1.45m–1.60m eye-level height, connect the 2-wire bus from the central KA2201-P DIN-rail supply, and terminate the line to the KA2703 indoor monitor. The system automatically syncs video and audio over the bus; Wi-Fi or Ethernet on the indoor monitor connects the entire system to the Tuya app in under 3 minutes.
Maximum transmission distances depend on conductor gauge: standard 0.5mm² (20 AWG) copper wire achieves up to 50 meters; 0.75mm² (18 AWG) reaches up to 80 meters; 1.0mm² (17 AWG) reaches up to 120 meters; and dedicated low-loss coaxial cable (SYV-75-5) reaches up to 200 meters from power distributor to outdoor station.
Direct cable interconnection is not supported because 2-wire bus and standard 48V PoE use different physical PHY protocols. However, you can bridge both subsystems seamlessly using our hybrid master gateway or through the Tuya Smart cloud ecosystem, enabling 2-wire outdoor stations and PoE monitors to call each other simultaneously.
A comprehensive quotation should itemize: the outdoor station model (e.g. KA-FV2208 series with exact button count), indoor monitor quantities (KA2703 7-inch or KA2103 10-inch), the KA2201-P DIN-rail central power controller, branch isolators if multiple risers exist, and power requirements for third-party electric strikes or magnetic locks.
In-depth engineering analyses on SIP 2.0 PBX integration, ONVIF CCTV recording, 2-wire apartment retrofits, and 3D biometric security.
Download complete pinouts, wiring diagrams, and engineering brochures directly from our technical library.